J23/J21S Open-type Tilting Power Press

Ваше текущее местоположение：

Product

J23/J21S Open-type Tilting Power Press

Описание продукта

Функции

J23/J21S Open-type tilting power press is to change the sliding bearing of transmission gear into rolling bearing in China. After the change, the transmission gear is resistant to wear, so as to avoid the big noise caused by the fast wear of copper tile.

J23/J21S Open-type tilting power press with a tonnage of over 80 adopts pneumatic double balancing cylinder structure, with small fluctuation of balance force, which balances the weight of slider and upper die and avoids the shaking of machine tool caused by the above weight.

It can prevent the impact and noise caused by the reverse force of the gear in the transmission, and can prevent the accident caused by the slide block falling when the brake is broken or the connecting rod is broken!

Murah dan berkualitas baik J21S-25T tipe terbuka memiringkan daya tekan dengan garansi

Engine parts use a combination of tensioning rods and frame structures that have sufficient strength and stiffness;

The slider USES guide rail, engine and welded slider steel. The material Q235-A USES CARBON dioxide gas shielded arc welding, which must be finely ground and must not be welded to remove slag and scars, so as to reduce the internal stress after welding.

技术参数 Specification

名称 Name			J23-10T	J23-16T	J23-25T	J23-40T	J23-63T	J23-80T	J23-100T	J23-125T	J21S-10T	J21S-16T	J21S-25T	21S-40T	J21S-63T	J21S-80T	J21S-100T	J21S-125T
公称压力 nominal pressure		千牛KN	100	160	250	400	630	800	1000	1250	100	160	250	400	630	800	1000	1250
公称压力行程nomial pressure stroke		毫米mm	4	5	6	6	6	8	9	10	4	5	5	6	6	8	9	10
滑块行程 slider stroke		毫米mm	50	60	70	100	100	120	130	140	50	60	70	100	100	120	130	140
滑块行程次数 slider stroke times		次/分 t/min	130	110	70	55	60	50	45	45	130	110	70	55	60	50	45	45
最大封闭高度 max closing height		毫米mm	180	220	260	320	330	380	380	400	180	220	260	320	330	380	380	400
封闭高度调节量closing height adjuster		毫米mm	35	50	60	80	80	100	100	100	35	50	60	80	80	100	100	100
滑块中心线至床身距离 distance between slipper centre and machine		毫米mm	120	180	190	230	240	260	310	340	420	500	500	500	500	500	500	500
工作台尺寸 work bench dimension	前后 front and back	毫米mm	240	300	320	400	450	480	590	660	240	300	320	400	450	480	590	660
工作台尺寸 work bench dimension	左右 left and right	毫米mm	360	450	530	650	710	750	890	980	360	450	530	650	710	750	890	980
工作台落脚孔尺寸 diameter of blank holding hole	前后 front and back	毫米mm	100	130	140	170	180	220	240	260	100	130	140	170	180	210	240	260
	左右 left and right	毫米mm	180	200	220	240	260	340	360	400	180	200	220	240	260	340	360	400
	直径 diameter	毫米mm	95	120	130	160	170	190	200	210	95	120	130	160	170	190	200	210
滑块底面总尺寸 total size of the bottom surface of the slider	前后 front and back	毫米mm	100	130	170	220	230	240	280	360	100	130	170	20	230	310	280	360
滑块底面总尺寸 total size of the bottom surface of the slider	左右 left and right	毫米mm	170	220	250	300;	340	370	410	480	170	220	250	300	340	240	410	480
模柄孔尺寸 Die handle hole size	直径 diameter	毫米mm	30	40	40	50	50	60	60	70	30	40	40	50	50	60	60	70
模柄孔尺寸 Die handle hole size	深度 depth	毫米mm	50	60	60	70	70	80	80	90	50	60	60	70	70	80	80	90
机身可倾角度 body ting angle		毫米mm	160	170	210	260	280	300	340	370	160	170	210	260	280	300	340	370
工作台至道轨间净距离 distance between bench to guideway		毫米mm	200	250	290	340	350	380	400	430	200	250	290	340	350	380	400	430
垫板厚度 pad thickness		毫米mm	35	45	50	80	80	90	100	110	35	45	50	80	80	90	100	110
机身可倾角度 body ting angle		度	30	30	25	25	25	25	/	/	/	/	/	/	/	/	/	/
电机 motor	功率 power	千瓦KW	1.1	1.5	2.2	4	5.5	7.5	7.5	11	1.1	1.5	2.2	4	5.5	7.5	7.5	11
电机 motor	转速 rotational speed	转/分t/min	1410	1410	1440	1440	1440	1440	1440	1460	1410	1410	1440	1440	1440	1440	1440	1460
外形尺寸 dimension	前后 front and back	毫米mm	910	1100	1200	1500	1600	1750	1800	1890	1200	1400	1600	1800	1900	1790	2100	2200
	左右 left and right	毫米mm	650	780	900	1100	1150	1300	1400	1500	650	780	900	1100	1150	1320	1400	1500
	高度 height	毫米mm	1560	1800	2050	2400	2480	2600	2680	2800	1560	1800	2000	2400	2450	2600	2680	2800

The form is for reference only, please consult the staff for more information

The main characteristics

1. Welding steel plate machine, good rigidity, more stable accuracy.

2. Longitudinal crankshaft, compact structure, beautiful appearance.

3. Electric printing height adjustment and digital display height control.

4. Long rectangular block, high bronze laminate guide accuracy.

5. Combined pneumatic clutch friction brake joint is stable and sensitive.

6. Folding safety device type to ensure the safety of the whole machine.

7. High slider, with a cylindrical balance bar, can achieve the balance bar sliding.

8. The slider can be moved very small, emergency stop movement, safer.

9. According to the safety standard of the printing machine, the circuit adopts double valve control and flexible operation

Предыдущий：Ещё не Cледующий：Ещё не