What are the characteristics of CNC bending machine? How to refuel the CNC bending machine? For these two questions, the answers are as follows.

Features of CNC bending machine:

(1) Direct angle programming with angle compensation function.

(2) The grating ruler real-time detection feedback correction, full closed loop control, back gauge and slider dead gauge positioning accuracy is 0.02mm.

(3) The upper mold adopts a quick clamping device, and the lower mold adopts a wedge deformation compensation mechanism.

(4) It has the function of multi-step programming, which can realize multiple automatic operations, complete the one-time processing of multi-step parts, and improve production efficiency.

(5) The imported hydraulic system with stable performance and compact structure can be selected according to user requirements, and the back gauge can be driven by ball screw and timing belt.

How to refuel the CNC bending machine?

The first refueling is the same as the ordinary bending machine. There are 20L hydraulic oil in small barrels and 170L anti-wear hydraulic oil in large barrels. The grades are selected according to the machine tool manufacturer's recommendations. The small barrel is light and the big barrel requires tools.

Open the oil tank cover of the bending machine, clean up the debris in the oil tank and clean it, check whether the oil filter is intact, and slowly pour the oil into the oil tank until the oil tank cover is covered by the oil standard. If possible, use a fuel dispenser to be fast and clean. Check the machine instructions again and carefully observe whether there are other places such as reducers that need to be refueled.

Locate the lubrication points, and lubricate according to the oil products specified in the lubrication points.